
Released RedHat EX200 Updated Questions PDF
EX200 Dumps and Practice Test (136 Exam Questions)
Who Is Red Hat Certified System Administrator (RHCSA) Certification Designed for?
This certification is aimed at seasoned system administrators who wish to prove their skills, talented Linux system administrators who require a certification by their organization or a mandate, learners who have completed the official Red Hat System Administration I (RH124) and Red Hat System Administration II (RH134) courses, Information Technology specialists who are trying to become a Red Hat Certified Engineer (RHCE), an RHCE who has out-of-date skills or whose certification is going to expire soon and who wants to again qualify as an RHCE, and finally, DevOps specialists who want to show their competency with container technology.
Red Hat EX200: Career prospects
After successfully passing the EX200 exam and obtaining the RHCSA certification, you will be able to land the following jobs: a Network Administrator, a Systems Administrator, a Linux System Administrator, a Senior Solution Architect, a UNIX System Administrator, or an Identity Management Analyst. As for your potential salary, you can earn from $64,000 to $150,000 per year, depending on the position you opt for.
NEW QUESTION 73
CORRECT TEXT
Configure a HTTP server, which can be accessed through http://station.domain40.example.com.
Please download the released page from http://ip/dir/example.html.
Answer:
Explanation:
# yum install -y httpd
# chkconfig httpd on
# cd /var/www/html
# wget http://ip/dir/example.html
# cp example.com index.html
# vim /etc/httpd/conf/httpd.conf
NameVirtualHost 192.168.0.254:80
<VirtualHost 192.168.0.254:80>
DocumentRoot /var/www/html/
ServerName station.domain40.example.com
</VirtualHost>
NEW QUESTION 74
A YUM repository has been provided at http://server.domain11.example.com/pub/x86_64/Server.
Configure your system to use this location as a default repository.
Answer:
Explanation:
vim/etc/yum.repos/base.repo
[base]
name=base
baseurl= http://server.domain11.example.com/pub/x86_64/Server
gpgcheck=0
enable=1
Save and Exit
Use yum list for validation, the configuration is correct if list the package information. If the Yum configuration is not correct then maybe cannot answer the following questions.
NEW QUESTION 75
Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server. )
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
NEW QUESTION 76
Create a volume group, and set 8M as a extends. Divided a volume group containing 50 extends on volume group lv (lvshare), make it as ext4 file system, and mounted automatically under /mnt/data. And the size of the floating range should set between 380M and 400M.
Answer:
Explanation:
see explanation below.
Explanation
# fdisk
# partprobe
# pvcreate /dev/vda6
# vgcreate -s 8M vg1 /dev/vda6 -s
# lvcreate -n lvshare -l 50 vg1 -l
# mkfs.ext4 /dev/vg1/lvshare
# mkdir -p /mnt/data
# vim /etc/fstab
/dev/vg1/lvshare /mnt/data ext4 defaults 0 0
# mount -a
# df -h
NEW QUESTION 77
Part 1 (on Node1 Server)
Task 4 [Controlling Access to Files]
Create collaborative directory /mnt/shares with the following characteristics:
Group ownership of /mnt/shares should be sharegrp.
The directory should be readable, writable and accessible to member of sharegrp but not to any other user. (It is understood that root has access to all files and directories on the system) Files created in /mnt/shares automatically have group ownership set to the sharegrp group.
Answer:
Explanation:
* [root@node1 ~]# mkdir -p /mnt/shares
[root@node1 ~]# ls -lrt /mnt/
[root@node1 ~]# chgrp sharegrp /mnt/shares/
[root@node1 ~]# chmod 2770 /mnt/shares/
[root@node1 ~]# ls -lrt /mnt/
### For Checking ###
[root@node1 ~]# su - harry
[harry@node1 ~]$ cd /mnt/shares/
[harry@node1 shares]$ touch harry
[harry@node1 shares]$ logout
[root@node1 ~]# su - natasha
[natasha@node1 ~]$ cd /mnt/shares/
[natasha@node1 shares]$ touch natasha
[natasha@node1 shares]$ ls -lrt
-rw-rw-r--. 1 harry sharegrp 0 Mar 21 06:03 harry
-rw-rw-r--. 1 natasha sharegrp 0 Mar 21 06:03 natasha
NEW QUESTION 78
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)
Answer:
Explanation:
see explanation below.
Explanation
# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)
NEW QUESTION 79
Please open the ip_forward, and take effect permanently.
Answer:
Explanation:
vim /etc/sysctl.conf net.ipv4.ip_forward = 1
sysctl -w (takes effect immediately)
If no "sysctl.conf" option, use these commands:
sysctl -a |grep net.ipv4
sysctl -P net.ipv4.ip_forward = 1
sysctl -w
NEW QUESTION 80
Part 1 (on Node1 Server)
Task 5 [Controlling Access to Files with ACLs]
Copy the file /etc/fstab to /var/tmp. Configure the following permissions on /var/tmp/fstab.
The file /var/tmp/fstab is owned by root user
The file /var/tmp/fstab is belongs to the root group
The file /var/tmp/fstab should be executable by anyone
The user harry is able to read and write on /var/tmp/fstab
The user natasha can neither read or write on /var/tmp/fstab
All other users (Current or future) have the ability to read /var/tmp/fstab
Answer:
Explanation:
* [root@node1 ~]# cp -p /etc/fstab /var/tmp/
[root@node1 ~]# ls -lrt /etc/fstab
[root@node1 ~]# ls -lrt /var/tmp/fstab
[root@node1 ~]# chmod a+x /var/tmp/fstab
[root@node1 ~]# getfacl /var/tmp/fstab
[root@node1 ~]# setfacl -m u:harry:rw- /var/tmp/fstab
[root@node1 ~]# setfacl -m u:natasha:--- /var/tmp/fstab
[root@node1 ~]# getfacl /var/tmp/fstab
getfacl: Removing leading '/' from absolute path names
# file: var/tmp/fstab
# owner: root
# group: root
user::rwx
user:harry:rw-
user:natasha:---
group::r-x
mask::rwx
other::r-x
* [root@node1 ~]# su - natasha
[natasha@node1 ~]$ cat /var/tmp/fstab
cat: /var/tmp/fstab: Permission denied
NEW QUESTION 81
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.
Answer:
Explanation:
see explanation below.
Explanation
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G t
8 I
82
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)
NEW QUESTION 82
You are a System administrator. Using Log files very easy to monitor the system. Now there are 50 servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers into on LOG Server. How will you configure the LOG Server to accept logs from remote host?
Answer:
Explanation:
By default, system accept the logs only generated from local host. To accept the Log from other host configure:
vi /etc/sysconfig/syslog SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages received with -r
service syslog restart
NEW QUESTION 83
Create the user named eric and deny to interactive login.
Answer:
Explanation:
see explanation below.
Explanation
* useradd eric
* passwd eric
* vi /etc/passwd
* eric:x:505:505::/home/eric:/sbin/nologin
Which shell or program should start at login time is specified in /etc/passwd file? By default, Redhat Enterprise Linux assigns the /bin/bash shell to the users. To deny the interactive login, you should write
/sbin/nologin or /bin/ false instead of login shell.
NEW QUESTION 84
Binding to an external validation server.
System server.domain11.example.com provides a LDAP validation service, your system should bind to this service as required:
Base DN of validation service is dc=example,dc=com
LDAP is used for providing account information and validation information Connecting and using the certification of http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to encrypt After the correct configuration, ldapuser1 can log into your system, it does not have HOME directory until you finish autofs questions, ldapuser1 password is password.
Answer:
Explanation:
yum -y install sssd authconfig-gtk krb5-workstation authconfig-gtk // open the graphical interface Modify user account database to ldap, fill up DN and LDAP SERVER as questions required, use TLS to encrypt connections making tick, write http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to download ca, authentication method choose ldap password.
You can test if the ldapuser is added by the following command:
Id ldapuser1
Note: user password doesn't not need to set
NEW QUESTION 85
CORRECT TEXT
Create a catalog under /home named admins. Its respective group is requested to be the admin
group. The group users could read and write, while other users are not allowed to access it. The
files created by users from the same group should also be the admin group.
Answer:
Explanation:
# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NEW QUESTION 86
CORRECT TEXT
Add user: user1, set uid=601
Password: redhat
The user's login shell should be non-interactive.
Answer:
Explanation:
# useradd -u 601 -s /sbin/nologin user1
# passwd user1
redhat
NEW QUESTION 87
Configure the verification mode of your host account and the password as LDAP. And it can login successfully through ldapuser40. The password is set as "password".
And the certificate can be downloaded from http://ip/dir/ldap.crt. After the user logs on the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
see explanation below.
Explanation
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP) OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION 88
......
What Career Prospects Are Open to Certified Professionals?
When you have this certification, you'll be eligible for numerous IT positions. All the following career choices below are open to you:
- Unix System Administrator;
- Systems Engineer;
- Linux System Administrator;
- Site Reliability Engineer (SRE);
Moreover, all these jobs pay giant salaries. According to PayScale.com, the average annual income of a Linux System Administrator is $74,081 and that of a DevOps Engineer is $95,094. The yearly earnings of a System Administrator are anywhere between $45,000 and $88,000, while the salary per annum for a Systems Engineer can be as high as $80,458. A Site Reliability Engineer (SRE) can earn an average amount of $117,417 annually, while the average yearly payout of a Unix System Administrator is $77,474. Lastly, the annual income of a Solutions Architect can reach $118,833. If you were doubting whether it's worth becoming a Red Hat Certified Systems Administrator, then these high monetary figures should convince you to do so.
EX200 Exam Dumps Pass with Updated 2021 Certified Exam Questions: https://pass4sure.dumpstorrent.com/EX200-exam-prep.html