[Nov 27, 2025] Valid FCP_FGT_AD-7.6 Test Answers & Fortinet FCP_FGT_AD-7.6 Exam PDF [Q20-Q39]

[Nov 27, 2025] Valid FCP_FGT_AD-7.6 Test Answers & Fortinet FCP_FGT_AD-7.6 Exam PDF

Realistic FCP_FGT_AD-7.6 Exam Dumps with Accurate & Updated Questions

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
Topic 2	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.
Topic 3	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.
Topic 4	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 5	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.

 

NEW QUESTION # 20
Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route.
Why is the administrator not able to select the new address in the Destination field of the new static route?

• A. In the new static route, the administrator must select Named Address.
• B. In the new firewall address, Routing configuration must be enabled.
• C. In the new firewall address, the FQDN address must first beresolved.
• D. In the new static route, the administrator must first set the interface to port2.

Answer: B

Explanation:
To use an FQDN-based address object as a destination in a static route, the "Routing configuration" option must be enabled in the firewall address settings. Without this, the address cannot be selected for routing.

NEW QUESTION # 21
Which two statements are true about an HA cluster? (Choose two.)

• A. When sniffing the heartbeat interface, the administrator must see the IP address 169.254.0.2.
• B. An HA cluster cannot have both in-band and out-of-band management interfaces at the same time.
• C. Link failover triggers a failover if the administrator sets the interface down on the primary device.
• D. HA incremental synchronization includes FIB entries and IPsec SAs.

Answer: C,D

Explanation:
Setting an interface down on the primary device triggers a failover due to link failover detection.
HA incremental synchronization includes forwarding information base (FIB) entries and IPsec security associations (SAs) to maintain session continuity.

NEW QUESTION # 22
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

• A. The collector agent uses a Windows API to query DCs for user logins.
• B. NetAPI polling can increase bandwidth usage in large networks.
• C. The NetSessionEnum function is used to track user logouts.
• D. The collector agent must search Windows application event logs.

Answer: B

Explanation:
NetAPI polling mode involves frequent queries to domain controllers, which can cause increased bandwidth usage, especially in large networks with many login events.

NEW QUESTION # 23
Refer to the exhibit.

As an administrator you have created an IPS profile, but it is not performing as expected. While testing you got the output as shown in the exhibit.
What could be the possible reason of the diagnose output shown in the exhibit?

• A. There is a no firewall policy configured with an IPS security profile.
• B. Administrator entered the command diagnose test application ipsmonitor 5.
• C. Administrator entered the command diagnose test application ipsmonitor 99.
• D. FortiGate entered into IPS fail open state.

Answer: A

Explanation:
The output shows the IPS engine count as 0, indicating no active IPS engines are running. This typically means no firewall policy is referencing the IPS security profile, so the IPS profile is not being applied or triggered.

NEW QUESTION # 24
Refer to the exhibit, which shows a partial configuration from the remote authentication server.

Why does the FortiGate administrator need this configuration?

• A. To authenticate and match the Training OU on the RADIUS server.
• B. To authenticate Any FortiGate user groups.
• C. To authenticate only the Training user group.
• D. To set up a RADIUS server Secret.

Answer: C

Explanation:
The Fortinet-Group-Name attribute is used to restrict authentication to users who belong specifically to the "Training" user group on the RADIUS server.

NEW QUESTION # 25
When configuring a FortiGate in a multi-WAN setup, why would an administrator enable session preservation on an interface?

• A. To make sure all sessions without source NAT enabled always use the primary WAN link
• B. To ensure that existing SSL VPN connections remain on the same interface even if route changes occur
• C. To improve security by forcing users to authenticate again when the WAN link changes
• D. To allow the FortiGate to dynamically change interfaces for all active sessions when a WAN link fails

Answer: B

Explanation:
Session preservation keeps active sessions, such as SSL VPNs, tied to the original interface to prevent disruption when WAN routes change.

NEW QUESTION # 26
Which three statements explain a flow-based antivirus profile? (Choose three.)

• A. FortiGate buffers the whole file but transmits to the client at the same time.
• B. The IPS engine handles the process as a standalone.
• C. If a virus is detected, the last packet is delivered to the client.
• D. Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection.
• E. Flow-based inspection optimizes performance compared to proxy-based inspection.

Answer: A,D,E

Explanation:
Flow-based antivirus buffers the entire file while simultaneously transmitting data to the client to minimize latency.
Flow-based inspection combines multiple scanning techniques from proxy-based modes for efficient detection.
Flow-based inspection provides better performance by processing traffic on the fly without full proxy overhead.

NEW QUESTION # 27
You have configured an application control profile, set peer-to-peer traffic to Block under the Categories tab, and applied it to the firewall policy. However, your peer-to-peer traffic on known ports is passing through the FortiGate without being blocked.
What FortiGate settings should you check to resolve this issue?

• A. Application and Filter Overrides
• B. Replacement Messages for UDP-based Applications
• C. Network Protocol Enforcement
• D. FortiGuard category ratings

Answer: C

Explanation:
Network Protocol Enforcement settings control how FortiGate inspects and enforces protocols on traffic, including peer-to-peer applications on known ports. If not properly enabled, peer-to-peer traffic may bypass blocking despite the application control profile.

NEW QUESTION # 28
What is the primary FortiGate election process when the HA override setting is enabled?

• A. Connected monitored ports > System uptime > Priority > FortiGate serial number
• B. Connected monitored ports > Priority > HA uptime > FortiGate serial number
• C. Connected monitored ports > Priority > System uptime > FortiGate serial number
• D. Connected monitored ports > HA uptime > Priority > FortiGate serial number

Answer: B

Explanation:
When HA override is enabled, FortiGate uses the following election order: number of connected monitored ports, then device priority, followed by HA uptime, and finally FortiGate serial number as a tiebreaker.

NEW QUESTION # 29
Refer to the exhibits.

The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)

• A. FortiGate drops new sessions.
• B. Administrators can access FortiGate only through the console port.
• C. FortiGate has entered conserve mode.
• D. Administrators can change the configuration.

Answer: A,D

Explanation:
Since memory usage is at 90%, exceeding the red threshold (88%), FortiGate enters a state where configuration changes are still allowed.
In this state, FortiGate drops new sessions to preserve resources and maintain stability.

NEW QUESTION # 30
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects.
The WAN (port2) interface has the IP address 100.65.0.101/24.
The LAN (port4) interface has the IP address 10.0.11.254/24.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on HQ-PC-1 (10.0.11.50) pings the IP address of BR-FGT (100.65.1.111)

• A. 100.65.0.99
• B. 100.65.0.149
• C. 100.65.0.101
• D. 100.65.0.49

Answer: A

Explanation:
The ping traffic policy uses the IP pool named SNAT-Remote1, which has the external IP range 100.65.0.99. Therefore, traffic matching this policy (ping from HQ-PC-1 to BR1-FGT) will use 100.65.0.99 for source NAT.

NEW QUESTION # 31
You are analyzing connectivity problems caused by intermediate devices blocking traffic in SSL VPN environment.
In which two ways can you effectively resolve the problem? (Choose two.)

• A. You can use SSL VPN tunnel mode to prevent problems with blocked ESP and UDP ports (500 or 4500).
• B. You can turn off IKE fragmentation to fix large certificate negotiation problems.
• C. You should use IPsec to solve issues with fragment drops and large certificate exchanges.
• D. You can configure a hub-and-spoke topology with SSL VPN tunnels to bypass blocked UDP ports.

Answer: A,B

Explanation:
Disabling IKE fragmentation helps resolve issues caused by intermediate devices blocking large fragmented packets during certificate negotiation.
Using SSL VPN tunnel mode encapsulates traffic over HTTPS, bypassing blocks on ESP and UDP ports commonly used by IPsec.

NEW QUESTION # 32
Refer to the exhibit.

What would be the impact of these settings on the Server certificate SNI check configuration on FortiGate?

• A. FortiGate will accept and use the CN in the server certificate for URL filtering if the SNI does not match the CN or SAN fields.
• B. FortiGate will accept the connection with a warning if the SNI does not match the CN or SAN fields.
• C. FortiGate will close the connection if the SNI does not match the CN and SAN fields
• D. FortiGate will close the connection if the SNI does not match the CN or SAN fields.

Answer: C

Explanation:
With the Server certificate SNI check set to Strict, FortiGate enforces that the SNI must match either the Common Name (CN) or Subject Alternative Name (SAN) in the server certificate; otherwise, it closes the connection.

NEW QUESTION # 33
You have configured the below commands on a FortiGate.

What would be the impact of this configuration on FortiGate?

• A. FortiGate will enable strict RPF on all its interfaces and port1 will be exempted from RPF checks.
• B. Port1 will be enabled with flexible RPF, and all other interfaces will be enabled for strict RPF
• C. The global configuration will take precedence and FortiGate will enable strict RPF on all interfaces.
• D. FortiGate will enable strict RPF on ail its interfaces and port1 will be enable for asymmetric routing.

Answer: A

Explanation:
The global setting enables strict source checking (RPF) on all interfaces by default. The per-interface setting disables the source check on port1, exempting it from strict RPF enforcement.

NEW QUESTION # 34
An administrator wanted to configure an IPS sensor to block traffic that triggers a signature set number of times during a specific time period.
How can the administrator achieve the objective?

• A. Use IPS filter, rate-mode periodical option.
• B. Use IPS packet logging option with periodical filter option.
• C. Use IPS group signatures, set rate-mode 60.
• D. Use IPS filter, rate-mode periodical option.

Answer: D

Explanation:
The IPS filter with the rate-mode set to "periodical" allows the administrator to block traffic that triggers a signature a specified number of times within a defined time period, meeting the requirement.

NEW QUESTION # 35
A FortiGate firewall policy is configured with active authentication, however, the user cannot authenticate when accessing a website.
Which protocol must FortiGate allow even though the user cannot authenticate?

• A. LDAP
• B. Kerberos
• C. DNS
• D. TACASC+

Answer: C

Explanation:
DNS traffic must be allowed so the user can resolve domain names and reach the authentication server or web resources, even if authentication initially fails.

NEW QUESTION # 36
Refer to the exhibits.

Based on the current HA status, an administrator updates the override and priority parameters on HQ-NGFW-1 and HQ-NGFW-2 as shown in the exhibit.
What would be the expected outcome in the HA cluster?

• A. HQ-NGFW-1 will synchronize the override disable setting with HQ-NGFW-2.
• B. The HA cluster will become out of sync because the override setting must match on all HA members.
• C. HQ-NGFW-2 will take over as the primary because it has the override enable setting and higher priority than HQ-NGFW-1.
• D. HQ-NGFW-1 will remain the primary because HQ-NGFW-2 has lower priority.

Answer: C

Explanation:
With override enabled on HQ-NGFW-2 and its higher priority (110 vs. 90), HQ-NGFW-2 will become the primary device, preempting HQ-NGFW-1 despite the current primary status.

NEW QUESTION # 37
Refer to the exhibit.

An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?

• A. The ABC.Com is configured under application profile, which must be configured as a web filter profile.
• B. The ABC.Com Type is set as Application instead of Filter.
• C. The ABC.Com Action is set to Allow.
• D. The ABC.Com is hitting the category Excessive-Bandwidth.

Answer: C

Explanation:
When the action is set to Allow in an application override, traffic matching this override is allowed without generating security logs because it bypasses deeper inspection and blocking.

NEW QUESTION # 38
......

FCP_FGT_AD-7.6 Exam Dumps - PDF Questions and Testing Engine: https://pass4sure.dumpstorrent.com/FCP_FGT_AD-7.6-exam-prep.html