CheckPoint 156-215.81 Study Guide Archives Updated on May 08, 2024
Download 156-215.81 Mock Test Study Material
CheckPoint 156-215.81 exam is an essential certification for security administrators who work with Check Point Security Gateway R81. Passing the exam demonstrates the ability to manage and maintain network security using Check Point Security Gateway R81. It is an industry-recognized certification that can help security administrators advance their careers and improve their job prospects. To prepare for the exam, candidates can take official training courses, self-study using Check Point documentation, or practice exams.
What are some best practices for taking the CheckPoint 156-215.81 Exam?
Be prepared for every question, including ones you don't know the answer to. The exam is not a “pass or fail” type of exam. If you don't know the answer to a question, leave it blank and move on to the next one without worrying about it too much. Instead, focus on completing all of them correctly, because doing so will mean that when you do get an answer wrong, you have time to come up with an educated guess as to why it was wrong and make corrections in other areas of your knowledge base.
Take a practice test before your actual exam date to see how well you're prepared for it and what areas need more study. CheckPoint 156-215.81 exam dumps is the best choice to prepare for this exam.
Practice test questions are available online from certification questions; use them as much as possible throughout your preparation process so that you can become familiar with them and know how to approach each question properly before taking your actual exam date (which is when you'll spend most of your time studying).
NEW QUESTION # 216
When configuring Spoof Tracking, which tracking actions can an administrator select to be done when spoofed packets are detected?
- A. Log, send snmp trap, email
- B. Drop packet, alert, none
- C. Log, alert, none
- D. Log, allow packets, email
Answer: C
Explanation:
Configure Spoof Tracking - select the tracking action that is done when spoofed packets are detected:
NEW QUESTION # 217
Which of the following is NOT a role of the SmartCenter:
- A. Address translation
- B. Certificate authority
- C. Status monitoring
- D. Policy configuration
Answer: B
NEW QUESTION # 218
A stateful inspection firewall works by registering connection data and compiling this information. Where is the information stored?
- A. In a CSV file on the firewall hard drive located in $FWDIR/conf/.
- B. In the Sessions table.
- C. In the system SMEM memory pool.
- D. In State tables.
Answer: D
NEW QUESTION # 219
Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new multicore CPU to replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?
- A. Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security Gateway
- B. Go to clash-Run cpstop | Run cpstart
- C. Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security Gateway | Install Security Policy
- D. Administrator does not need to perform any task. Check Point will make use of the newly installed CPU and Cores
Answer: A
Explanation:
Explanation
The correct answer is B because after installing a new multicore CPU, the administrator needs to configure CoreXL to make use of the additional cores and reboot the Security Gateway. Installing the Security Policy is not necessary because it does not affect the CoreXL configuration1. References: Check Point R81 Security Management Administration Guide
NEW QUESTION # 220
Security Gateway software blades must be attached to what?
- A. Security Gateway container
- B. Security Gateway
- C. Management server
- D. Management container
Answer: A
Explanation:
Explanation
Security Gateway software blades must be attached to a Security Gateway container. A Security Gateway container is a logical object that represents a physical or virtual machine that runs the Security Gateway software. A software blade is a modular security feature that can be enabled or disabled eway container. A software blade can provide functions such as firewall, VPN, IPS, anti-virus, anti-bot, application control, URL filtering, etc.References: [Security Gateway Containers], [Software Blades]
NEW QUESTION # 221
Fill in the blank: With the User Directory Software Blade, you can create user definitions on a(n) ___________ Server.
- A. SecurID
- B. NT domain
- C. SMTP
- D. LDAP
Answer: D
Explanation:
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_SecurityManagement_AdminGuide/Topics-SECMG/LDAP-and-User-Directory.htm
NEW QUESTION # 222
When an Admin logs into SmartConsole and sees a lock icon on a gateway object and cannot edit that object, what does that indicate?
- A. Another Admin has made an edit to that object and has yet to publish the change.
- B. The gateway is not powered on.
- C. The Admin would need to login to Read-Only mode
- D. Incorrect routing to reach the gateway.
Answer: A
NEW QUESTION # 223
When configuring Anti-Spoofing, which tracking options can an Administrator select?
- A. Log, Alert, None
- B. Drop Packet, Alert, None
- C. Log, Allow Packets, Email
- D. Log, Send SNMP Trap, Email
Answer: A
Explanation:
Configure Spoof Tracking - select the tracking action that is done when spoofed packets are detected:
Log - Create a log entry (default)
Alert - Show an alert
None - Do not log or alert
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_SecurityManagement_AdminGuide/Topics-SECMG/Preventing-IP-Spoofing.htm
NEW QUESTION # 224
Which option, when applied to a rule, allows traffic to VPN gateways in specific VPN communities?
- A. All Site-to-Site VPN Communities
- B. Specific VPN Communities
- C. Accept all encrypted traffic
- D. All Connections (Clear or Encrypted)
Answer: C
NEW QUESTION # 225
Which key is created during Phase 2 of a site-to-site VPN?
- A. Symmetrical IPSec key
- B. Pre-shared secret
- C. Diffie-Hellman Private Key
- D. Diffie-Hellman Public Key
Answer: A
Explanation:
Explanation
The key that is created during Phase 2 of a site-to-site VPN is a symmetrical IPSec key3. This key is used to encrypt and decrypt the data that is exchanged between the VPN peers3. The symmetrical IPSec key is derived from the shared secret and the Diffie-Hellman public keys that are exchanged during Phase 13.
References: Site to Site VPN in R80.x - Tutorial for Beginners
NEW QUESTION # 226
Which one of the following is the preferred licensing model? Select the BEST answer
- A. Central licensing because it ties the package license to the IP-address of the Security Management Server and has no dependency on the gateway.
- B. Local licensing because it ties the package license to the IP-address of the gateway and has no dependency of the Security Management Server.
- C. Central licensing because it ties the package license to the MAC-address of the Security Management Server's Mgmt-interface and has no dependency on the gateway.
- D. Local licensing because it ties the package license to the MAC-address of the gateway management interface and has no Security Management Server dependency.
Answer: A
NEW QUESTION # 227
When should you generate new licenses?
- A. Before installing contract files.
- B. When the existing license expires, license is upgraded or the IP-address where the license is tied changes.
- C. Only when the license is upgraded.
- D. After an RMA procedure when the MAC address or serial number of the appliance changes.
Answer: B
Explanation:
Explanation
You should generate new licenses when the existing license expires, license is upgraded or the IP-address where the license is tied changes13. These scenarios require a new license to be generated and activated on the Security Gateway or Management Server13. Therefore, the correct answer is C. When the existing license expires, license is upgraded or the IP-address where the license is tied changes
NEW QUESTION # 228
Name the authentication method that requires token authenticator.
- A. DynamicID
- B. Radius
- C. TACACS
- D. SecureID
Answer: D
Explanation:
Explanation
SecureID is the authentication method that requires token authenticator2. SecureID is a two-factor authentication method that uses a hardware or software token to generate a one-time password. The user must enter the token code along with their username and password to authenticate. References: Check Point R81 Identity Awareness Administration Guide
NEW QUESTION # 229
When comparing Stateful Inspection and Packet Filtering, what is a benefit that Stateful Inspection offers over Packer Filtering?
- A. Stateful Inspection offers no benefits over Packet Filtering.
- B. Only one rule is required for each connection.
- C. Stateful Inspection does not use memory to record the protocol used by the connection.
- D. Stateful Inspection offers unlimited connections because of virtual memory usage.
Answer: B
NEW QUESTION # 230
The technical-support department has a requirement to access an intranet server. When configuring a User Authentication rule to achieve this, which of the following should you remember?
- A. Once a user is first authenticated, the user will not be prompted for authentication again until logging out.
- B. The Security Gateway first checks if there is any rule that does not require authentication for this type of connection before invoking the Authentication Security Server.
- C. You can only use the rule for Telnet, FTP, SMPT, and rlogin services.
- D. You can limit the authentication attempts in the User Properties' Authentication tab.
Answer: B
NEW QUESTION # 231
Fill in the blank: Once a license is activated, a ________ should be installed.
- A. License Management file
- B. Service Contract file
- C. License Contract file
- D. Security Gateway Contract file
Answer: B
Explanation:
Service Contract File
Following the activation of the license, a Service Contract File should be installed. This file contains important information about all subscriptions purchased for a specific device and is installed via SmartUpdate. A detailed of the Service Contract File can be found in sk33089.
NEW QUESTION # 232
Bob and Joe both have Administrator Roles on their Gaia Platform. Bob logs in on the WebUI and then Joe logs in through CLI. Choose what BEST describes the following scenario, where Bob and Joe are both logged in:
- A. When Joe logs in, Bob will be log out automatically.
- B. If Joe tries to make changes, he won't, database will be locked.
- C. Since they both are log in on different interfaces, they both will be able to make changes.
- D. Bob will be prompt that Joe logged in.
Answer: B
NEW QUESTION # 233
......
Check Point Certified Security Administrator R81 is an industry-recognized certification exam designed to test the skills and knowledge of IT professionals in managing and configuring Check Point Security solutions. Check Point Certified Security Administrator R81 certification exam is intended for security administrators, network administrators, and other IT professionals who are responsible for managing network security solutions. The Check Point 156-215.81 exam is the latest version of the certification exam which includes updated content and new topics to ensure that candidates have the latest knowledge and skills required to manage Check Point Security solutions.
156-215.81 Questions Prepare with Learning Information: https://pass4sure.dumpstorrent.com/156-215.81-exam-prep.html