[Aug 04, 2024] DumpsTorrent 300-430 dumps & CCNP Enterprise sure practice dumps
Cisco 300-430 Actual Questions and Braindumps
NEW QUESTION # 142
An engineer configures a deployment to support:
- Cisco CMX
- licenses for at least 3000 APs
- 6000 wIPS licenses
The Cisco vMSE appliance must be sized for this deployment. Which Cisco vMSE Release 8 option must the engineer deploy?
- A. Low-End vMSE
- B. Standard vMSE
- C. Large vMSE
- D. High-End vMSE
Answer: D
Explanation:
NEW QUESTION # 143
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. broadcast forwarding
- B. controller IGMP snooping
- C. multicast AP multicast mode
- D. unicast AP multicast mode
Answer: D
NEW QUESTION # 144
An engineer is responsible for a wireless network for an enterprise. The enterprise has distributed offices around the globe, and all APs are configured in FlexConnect mode. The network must be configured to support 802.11r and CCKM. What needs to be implemented to accomplish this goal?
- A. Enable FlexConnect local switching.
- B. Enable FlexConnect local authentication.
- C. Create FlexConnect groups.
- D. Enable VLAN-based central switching.
Answer: C
NEW QUESTION # 145
An engineer is in the process of implementing Fastiane on a wireless network with a Mobility Express AP installed and Apple end-user devices. Due to a security concern, the IT department has updated all the iPads to version 14.5.423551943. Which QoS profile must the engineer configure on the user WLAN?
- A. Silver
- B. Platinum
- C. Best Effort
- D. Bronze
Answer: B
NEW QUESTION # 146
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?
- A. static IP
- B. fast roaming
- C. multicast
- D. mDNS
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.html
NEW QUESTION # 147
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. connect and engage
- B. presence
- C. analytics
- D. detect and locate.
Answer: D
Explanation:
NEW QUESTION # 148
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?
- A. Create multicast groups on the central Layer 3 switch.
- B. Enable IGMP snooping on the WLC
- C. Enable multicast mode on the WLC
- D. Enable IGMPv3 on the central Layer 3 switch.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011.html
NEW QUESTION # 149
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?
- A. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the
5.0-GHz band. - B. Configure a second WLC to support half of the APs in the deployment.
- C. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
- D. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
Answer: D
Explanation:
NEW QUESTION # 150
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?
- A. WLC roles for commands and the network range 192 168 1 0/255 255 255.0
- B. NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0
- C. shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0
Answer: B
NEW QUESTION # 151
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver.
This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Configure QoS on the mobile devices that have Jabber installed.
- B. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
- C. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- D. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabb er_in_WLAN.html#reference_7B4539C91FBE4639ACF906F6F3931667
NEW QUESTION # 152
Which statement about the VideoStream/Multicast Direct feature is true?
- A. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.
- B. It converts the unicast frame to a multicast frame over the air.
- C. Each VideoStream client acknowledges receiving a video IP multicast stream.
- D. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.
Answer: C
Explanation:
NEW QUESTION # 153
A wireless network engineer must present a list of all rogue APs with a high severity score to senior management.
Which report must be created in Cisco Prime Infrastructure to provide this information?
- A. Rogue AP Count Summary
- B. New Rogue APs
- C. Rogue AP Events
- D. Rogue APs
Answer: D
NEW QUESTION # 154
An engineer configured a Cisco AireOS controller with two TACACS+ servers.
The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted.
Which cause of this issue is true?
- A. DNS query is enabled
- B. Fallback is disabled
- C. Fallback is enabled
- D. DNS query is disabled
Answer: B
NEW QUESTION # 155
An engineer manages the wireless network for a government agency. The wireless network is used for access to the corporate network. The wireless network must include the latest wIPS/wIDS detection definitions. Which action does the engineer take to ensure that this requirement is met?
- A. Configure the Cisco WLC to repoll the Cisco MSE for update definitions.
- B. Configure Cisco Prime Infrastructure to push new definitions to the APs.
- C. Update the Cisco MSE software.
- D. Update the Cisco WLC software.
Answer: D
NEW QUESTION # 156
Refer to the exhibit. A company is implementing Cisco ISE and IBN for their WLAN. The pictured IBN profile is applied to BYOD devices that are not registered to the Mobile Device Manager.
Which advanced setting must be enabled on the WLAN to allow the policy to work correctly?
- A. static IP tunneling
- B. Aironet IE
- C. RADIUS profiling
- D. allow AAA override
Answer: D
NEW QUESTION # 157
Which three characteristics of a rogue AP pose a high security risk? (Choose three.)
- A. low RSSI
- B. high RSSI
- C. distant location
- D. open authentication
- E. foreign SSID
- F. accepts clients
Answer: D,E,F
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/74/configuration/guides/consolidated/b_cg74_CONSO
NEW QUESTION # 158
A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need on average
391595179 bits per second to function properly. What is the QoS marking that needs to be applied to that WLAN?
- A. Silver
- B. Gold
- C. Platinum
- D. Bronze
Answer: B
NEW QUESTION # 159
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?
- A. AAA override
- B. RADIUS server overwrite interface
- C. custom AVC profile
- D. WLAN local policy
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION # 160
Refer to the exhibit.
A wireless engineer has integrated the wireless network with a RADIUS server. Although the configuration on the RADIUS is correct, users are reporting that they are unable to connect. During troubleshooting, the engineer notices that the authentication requests are being dropped. Which action will resolve the issue?
- A. Configure the shared-secret keys on the controller and the RADIUS server.
- B. Authenticate the client using the same EAP type that has been set up on the RADIUS server.
- C. Allow connectivity from the wireless controller to the IP of the RADIUS server.
- D. Provide a valid client username that has been configured on the RADIUS server.
Answer: C
NEW QUESTION # 161
Refer to the exhibit.
An engineer must provide a position of rogue APs on a floor map using Cisco PI 3.0, but no rogue AP options are showing on the left-hand navigation menu under Maps. What is the reason for this omission?
- A. An assurance license is not installed.
- B. Cisco MSE has not been added to Cisco PI.
- C. The controller operational status background task is disabled.
- D. The Show Detected Interferers feature under the AP option is disabled.
Answer: A
NEW QUESTION # 162
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9.
Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
- A. Permit 0.0.0.0 0.0.0.0 any DNS any
- B. Permit any any any
- C. Permit 0.0.0.0 0.0.0.0 UDP DNS any
- D. Permit 0.0.0.0 0.0.0.0 UDP any DNS
- E. Permit 0.0.0.0 0.0.0.0 UDP any any
Answer: C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
NEW QUESTION # 163
An engineer has successfully implemented 10 active RFID tags in an office environment The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window.
Which setting on Cisco CMX allows the engineer to view the tags?
- A. Define an RFID group globally and add the tags.
- B. Enable probing clients for active tags.
- C. Enable hyper location services for RFID.
- D. Enable RFID tags in tracking options
Answer: D
NEW QUESTION # 164
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the AVC application WebEx-app-sharing to mark
- B. Change the WLAN reserved bandwidth for WebEx
- C. Create an ACL for WebEx
- D. Create an AVC profile for WebEx
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION # 165
......
Latest 300-430 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://pass4sure.dumpstorrent.com/300-430-exam-prep.html