2026 Updated Fortinet FCP_FAZ_AD-7.4 Certification Study Guide Pass FCP_FAZ_AD-7.4 Fast
FCP_FAZ_AD-7.4 Dumps PDF 2026 Program Your Preparation EXAM SUCCESS
NEW QUESTION # 16
Which two methods are the most common methods to control and restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Security Fabric
- B. Virtual domains
- C. Administrative access profiles
- D. Trusted hosts
Answer: C,D
Explanation:
Reference:
https://docs2.fortinet.com/document/fortianalyzer/6.0.0/administration-guide/581222/trusted-hosts
NEW QUESTION # 17
Which feature can you configure to add redundancy to FortiAnalyzer?
- A. VLAN interfaces
- B. Link aggregation
- C. Primary and secondary DNS
- D. IPv6 administrative access
Answer: B
Explanation:
Link aggregation is a method used to combine multiple network connections in parallel to increase throughput and provide redundancy in case one of the links fail. This feature is used in network appliances, including FortiAnalyzer, to add redundancy to the network connections, ensuring that there is a backup path for traffic if the primary path becomes unavailable.
Reference: The FortiAnalyzer 7.4.1 Administration Guide explains the concept of link aggregation and its relevance to
NEW QUESTION # 18
You finished registering a FortiGate device. After traffic starts to flow through FortiGate. you notice that only some of the logs expected are being received on FortiAnalyzer.
What could be the reason for the logs not arriving on FortiAnalyzer?
- A. This FortiGate model is not fully supported.
- B. FortiGate was added to the wrong ADOM type.
- C. This FortiGate is part of an HA cluster but it is the secondary device.
- D. FortiGate does not have logging configured correctly.
Answer: D
Explanation:
This FortiGate is part of an HA (High Availability) cluster, but it is a secondary device. In an HA configuration, typically only the primary device is responsible for sending logs to FortiAnalyzer, while the secondary device may not send logs unless the primary device fails.
NEW QUESTION # 19
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
- A. FortiAnalyzer2 and FortiAnalyzer3
- B. FortiAnalyzer1 and FortiAnalyzer2
- C. All devices listed can be members.
- D. FortiAnalyzer1 and FortiAnalyzer3
Answer: B
Explanation:
Based on the partial configuration output, the primary factor for determining which devices can be members of a FortiAnalyzer Fabric is the log-mode setting. Devices with the same log mode can be part of the same FortiAnalyzer Fabric.
FortiAnalyzer1: Log mode is set to collector.
FortiAnalyzer2: Log mode is set to collector.
FortiAnalyzer3: Log mode is set to analyzer.
Devices with the same log mode can be part of the same fabric. Since FortiAnalyzer1 and FortiAnalyzer2 both have their log modes set to collector, they can be members of a FortiAnalyzer Fabric.
Therefore, the correct answer is FortiAnalyzer1 and FortiAnalyzer2.
NEW QUESTION # 20
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Shut down FortiAnalyzer and then replace the disk
- B. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- C. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- D. Perform a hot swap
Answer: A
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer
/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%
20hot%20swapping
NEW QUESTION # 21
What are two benefits of using fabric connectors? (Choose two.)
- A. Using fabric connectors is more efficient than using third-party polling with API.
- B. Fabric connectors allow you to improve redundancy.
- C. They allow FortiAnalyzer to send logs in real-time to public cloud accounts.
- D. You do not need an additional license to send logs to the cloud platform.
Answer: B,C
NEW QUESTION # 22
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A remote LDAP server
- B. A trusted host profile that restricts access to the LDAP group
- C. A local wildcard administrator account
- D. An administrator group
Answer: A,C
NEW QUESTION # 23
Which process caches logs on FortiGate when FortiAnalyzer is not reachable?
- A. sqlplugind
- B. logfiled
- C. miglogd
- D. oftpd
Answer: C
NEW QUESTION # 24
What is the recommended method of expanding disk space on a FortiAnalyzer VM?
- A. From the VM host manager, add an additional virtual disk and use the #execute lvm extend <disk number> command to expand the storage
- B. From the VM host manager, add an additional virtual disk and rebuild your RAID array
- C. From the VM host manager, expand the size of the existing virtual disk and use the # execute format disk command to reformat the disk
- D. From the VM host manager, expand the size of the existing virtual disk
Answer: A
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40848
NEW QUESTION # 25
Which fact must you consider after you enable auto-cache for reports?
- A. You must rebuild the SQL database for the change to take effect.
- B. You must choose a report type that supports this feature.
- C. Generating multiple reports simultaneously may cause data corruption.
- D. Larger reports may consume excessive system resources.
Answer: D
NEW QUESTION # 26
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A remote LDAP server
- B. A trusted host profile that restricts access to the LDAP group
- C. A local wildcard administrator account
- D. An administrator group
Answer: A,C
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38567
NEW QUESTION # 27
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
- B. FortiAnalyzer is functioning normally
- C. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- D. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
Answer: D
Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION # 28
Which two purposes does the auto cache setting on reports serve? (Choose two.)
- A. It automatically updates the hcache when new logs arrive.
- B. It provides diagnostics on report generation time.
- C. It reduces the log insert lag rate.
- D. It reduces report generation time.
Answer: A,D
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/384416/how-auto-cache-works
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/86926/enabling-auto-cache
NEW QUESTION # 29
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. fortinet is assigned the Standard_User administrative profile.
- B. A trusted host is configured.
- C. fortinet is assigned Restricted_User administrative profile.
- D. ADOM mode is configured with Advanced mode.
Answer: A
Explanation:
Administrator Fornetet is able to view logs and perform device management tasks such as adding and removing registered devices, but cannot create a mail server to send alert mails. The causes of this problem are:
fortinet is assigned a Restricted_User administrative rights profile.
Administrators who are assigned as Restricted_User have restricted access, which may include viewing logs and performing certain device management tasks, but not more advanced administrative functions such as configuring mail servers. Such permission restrictions prevent them from performing configuration changes that require higher permissions.
NEW QUESTION # 30
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob , and Google Cloud.
- B. Fabric connectors allow to save storage costs and improve redundancy.
- C. Storage connector service does not require a separate license to send logs to cloud platform.
- D. Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer API.
Answer: A,D
NEW QUESTION # 31
......
Get Perfect Results with Premium FCP_FAZ_AD-7.4 Dumps Updated 185 Questions: https://pass4sure.dumpstorrent.com/FCP_FAZ_AD-7.4-exam-prep.html