New D-VXR-DY-01 Dumps For Preparing Dell Hyperconverged Infrastructure Certified EMC Exam Well
Updated D-VXR-DY-01 Dumps Questions Are Available [2026] For Passing EMC Exam
NEW QUESTION # 54
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A. S Series
- B. G Series
- C. V Series
- D. P Series
Answer: C
NEW QUESTION # 55
An implementation engineer has just finished connecting a multi-rack VxRail cluster over a Layer 3 network. When attempting to migrate System VMs from the first rack to the second rack, they receive an error.
What is a possible reason for the error?
- A. System VMs must be on the same subnet
- B. vSphere DRS must be enabled
- C. Only Layer 2 networking is supported
- D. System VMs must be on different subnets
Answer: A
NEW QUESTION # 56
A company is in the process of configuring their Top of Rack (ToR) switches as a single rack that replicates to a secondary data center with vSphere Replication.
What is a consideration for this configuration?
- A. IPv6 and IPv4 multi-cast should be layer-3 routed between data centers
- B. IPv6 and IPv4 multi-cast should span the entire network in each data center
- C. IPv6 and IPv4 multi-cast traffic should span layer-2 between data centers
- D. IPv6 and IPv4 multi-cast traffic does not need to leave the ToR switches
Answer: B
NEW QUESTION # 57
What is the minimum license type required when deploying a five-nodes VxRail cluster with a customer- supplied vCenter Server?
- A. vCenter Server Essentials
- B. vCenter Server Standard
- C. vCenter Server Foundation
Answer: B
Explanation:
When architecting a VxRail solution that integrates a customer-supplied (external) vCenter Server instance to manage an incoming five-node VxRail cluster, careful evaluation of VMware licensing boundaries is required. The minimum required license tier for the external vCenter Server appliance in this scenario is vCenter Server Standard. VMware structures its vCenter licensing tiers based on scaling capabilities and host count constraints.
Lower-tier deployment options, such as vCenter Server Essentials, are rigidly restricted by VMware to managing a maximum of three ESXi hosts within an isolated environment, making it completely incompatible with a five-node topology. Similarly, vCenter Server Foundation editions carry a strict software limitation restricting management to a maximum of four ESXi hosts. Consequently, to legally and operationally license an external management plane capable of discovering, configuring, and orchestrating lifecycle operations across a five-node hyperconverged footprint, vCenter Server Standard must be provisioned. This tier removes host management ceilings and supports advanced enterprise features like multi-cluster scaling and cross- vCenter migrations.
References: Dell VxRail Deploy Study Guide; vCenter Server Choice and Planning; Licensing and External Management Topologies.
NEW QUESTION # 58
What is the complete list of menu option choices available in the RASR factory reset procedure when booting from the RASR ISO?
- A. - RASR RESET
- CREATE RASRUSB
- FACTORY RESET
- UPDATE FIRMWARE
- EXIT - B. - RASR RESET
- CREATE RASRUSB
- FACTORY RESET
- REBOOT
- UPDATE FIRMWARE
- EXIT - C. - RASR RESET
- CREATE RASRUSB
- FACTORY RESET
- QUIT - D. - RASR RESET
- CREATE RASRUSB
- FACTORY RESET
- REBOOT
- UPDATE FIRMWARE
- QUIT
Answer: C
NEW QUESTION # 59
What is a consideration when using ToR switches with VxRail?
- A. All-Flash models must use 10 GbE or faster ports.
- B. VxRail iDRAC Management ports require 10 GbE ports.
- C. IPv6 Multicast must be disabled in this environment.
- D. Link aggregation must be enabled on VxRail switch ports.
Answer: A
NEW QUESTION # 60
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process.
Where in the vSphere Client can they review alarms and overall vSAN health?
- A. Monitor > Issues and Alarms > All issues
Monitor > vSAN > Skyline Health - B. Triggered Alarms > All Issues > Issues and Alarms
Triggered Alarms > vSAN > Health - C. Monitor > All Issues > Issues and Alarms
Monitor > vSAN > Health - D. Triggered Alarms > Issues and Alarms > All issues
Triggered Alarams > vSAN > Skyline Health
Answer: A
NEW QUESTION # 61
You are expanding an existing 6 node VxRail V470F cluster by adding two additional V570F nodes.
What is the minimum VxRail version that will support this configuration?
- A. 4.5.150
- B. Mixed clusters are not supported
- C. 4.5.200
- D. 4.5.070
Answer: D
NEW QUESTION # 62
What does the VxRail NVT validate on ToR switches?
- A. IP address conflicts and SRS accessibility
- B. VLAN and LACP configurations
- C. VLAN and STP configurations
- D. NTP and DNS settings
Answer: C
NEW QUESTION # 63
What is the minimum configuration for a vSAN Stretched Cluster?
- A. 1+1 nodes and no witness
- B. 3+3 nodes and a witness
- C. 3+3 nodes and no witness
- D. 1+1 nodes and a witness
Answer: D
NEW QUESTION # 64
What is a benefit when using VxRail-Managed vCenter?
- A. Additional virtual distributed switch options.
- B. Ease of operation for lifecycle management.
- C. Enhanced security requirements.
- D. Ease of VM Migration across multiple clusters.
Answer: B
NEW QUESTION # 65
A VxRail Test Plan has been completed.
What is the protocol for recording the results?
- A. In front of a customer, complete each test and document the test date
- B. In front of a customer, complete and document each test, test date, and a screenshot of results
- C. With the implementation team, complete each test and document the test date
- D. With the implementation team, complete and document each test, test date, and a screenshot of results
Answer: D
NEW QUESTION # 66
You are attempting to reset a single G Series node running 4.0.x code to the factory default. You discover that the configbundle.tgz file is corrupt.
What is the recommended method to recover the node?
- A. Reset Script
- B. Mobile Build Server
- C. Node Replacement
- D. Rapid Appliance Self Recovery
Answer: B
NEW QUESTION # 67
Which vSAN features are specific to an all-flash model VxRail?
- A. Erasure Coding and Stretch Clustering
- B. Deduplication/Compression and Erasure Coding
- C. Deduplication/Compression and Thin Swap Objects
- D. Thin Swap Objects and Stretch Clustering
Answer: B
NEW QUESTION # 68
When will local updates be the preferred option to update a VxRail cluster?
- A. When working at a dark site.
- B. When using a customer provided vCenter.
- C. When a proxy server is required.
Answer: A
Explanation:
Local updates involve downloading the standalone VxRail composite upgrade bundle manually from the Dell Support Portal onto an administrative workstation and uploading it directly to the VxRail Manager local filesystem. This approach is highly preferred and often mandatory when working within a "dark site"-an enterprise datacenter environment that is completely air-gapped, isolated, or restricted from external internet access due to strict corporate security regulations, defense protocols, or compliance policies.
Under normal operating conditions, an internet-connected VxRail cluster can leverage Secure Connect Gateway to automate file acquisitions directly from Dell software repositories. However, in dark sites where external connection hooks or proxy exceptions are completely prohibited, the local update capability ensures that critical lifecycle management (LCM) operations, security patching, and platform enhancements can proceed seamlessly. The composite package uploaded locally contains all required hypervisor binaries, hardware microcode, and component driver updates matching the validated baseline state, eliminating external dependencies.
References: Dell VxRail Deploy Study Guide; Lifecycle Management and Cluster Upgrades; Dark Site Operational Procedures.
NEW QUESTION # 69
......
EMC Exam 2026 D-VXR-DY-01 Dumps Updated Questions: https://pass4sure.dumpstorrent.com/D-VXR-DY-01-exam-prep.html